NL-SG4 HS
Roughing machine (2 pairs)
NL-SG4HS performs, with traditional technology, the roughing of two pairs of lasts both in the original size and in the development of all other sizes.
The particular robustness of the mechanical structure and the exceptional material removal capacity of the roughing heads allow the use of plastic blanks much larger than the model to be produced.
During the machining phase, it is possible to process the development of the next size or a different model.
TECHNICAL DATA
| N. of pairs working at the same time | 2 p |
| N. of last produced in an hour | 120-130 p/h |
| Roughing cycle time | 0,5 min |
| Max turning Ø | 300 mm |
| Maximum workable length | 450 mm |
| Roughing pitch | 0.5÷20 mm/rev |
| Rotation speed | 10÷120 rev min – rev max |
| Roughing Tool Heads (standard) | 160×36 mm |
| Installed power | 28 Kw |
| Air pressure | 6 bar |
| Weight | 5600 Kg |
| Dimensions | 2850x1900x2500h mm |
